• Tel: +86-532-87781087
  • Fax: +86-532-87781088
  • E-mail: mix@co-nele.com
  • Address: Yuhuangling Industrial Park, Chengyang Dist, Qingdao, China

Vertical Axis Planetary Mixer for the Production of Polystyrene Particle Wallboard

Autior : conele Time : 2020/06/02

The biggest feature of polystyrene particle wallboard is the mortar product building material that is configured by proportioning light aggregate with polystyrene particles and other additives. This kind of wallboard is convenient to apply and the insulation effect is also very good. many. The polystyrene particle wallboard production line is not much different from the general wallboard production line. The key is that for the mixer used in the polystyrene particle wallboard production line, the mixing station should be carefully selected. Why?

The advantages of polystyrene particle wallboard benefit from the addition of polystyrene particle raw materials, and there are certain difficulties in mixing polystyrene particles with light aggregate and other materials. If the stirring is not in place, the polystyrene particles and the cement slurry cannot be uniformly mixed. The polystyrene particles will have many agglomerates or float on the cement slurry; if the stirring strength is too large, a small amount of cement after mixing may appear liquid At the same time, this excessive mixing also affects the later use of mortar.

       Vertical Axis Planetary Mixer for the Production of Polystyrene Particle Wallboard           Vertical Axis Planetary Mixer for the Production of Polystyrene Particle Wallboard


TAG:  Vertical Axis Planetary Mixer Polystyrene Particle Wallboard
Top